The UK Hyundai Coupe Club

rainbow999 · by **rainbow999** » Sun Feb 19, 2012 8:13 pm

Recently got my Gen3 2.0 came with years MOT with advisory of small leak at manifold front, Now today my engine check light has came on and after checking the "SEARCH BOX" it seems this could be my fault? has anyone else had similar problems they could advise were to get replacement cheaply or any after market ones thats stainless etc

Androo007 · by **Androo007** » Sun Feb 19, 2012 8:24 pm

Cracked. Don't buy secondhand, try and weld or any of that. New one, SS prob cheapest

rainbow999 · by **rainbow999** » Sun Feb 19, 2012 9:23 pm

Ahh I just got offered one in vgc of a 2005 accident damaged gen3 manifold + cat for £50 so thinking it'll do just now as intend doing stainless through on it.

thanks for reply

hyunky · by **hyunky** » Sun Feb 19, 2012 11:52 pm

I got a Second hand one off eBay when mine cracked, agreed with buyer if it failed emission check once I got it on he was having it back. They are £ hundreds new. 18 months later still going strong!

eggcatcher · by **eggcatcher** » Tue Feb 21, 2012 6:30 am

Androo007 wrote:Cracked. Don't buy secondhand, try and weld or any of that. New one, SS prob cheapest

manifold cheap, but by the time you buy a cat, and get it welded in, cost will build up.
these have appeared on ebay recently, from America, Ebay Item:310377324907

rainbow999 · by **rainbow999** » Tue Feb 21, 2012 9:11 am

anyone ever tried one of these?

Ebay Item:180682198887

thedupleman · by **thedupleman** » Tue Feb 21, 2012 10:28 am

That's what's known as a pot luck.....some people love,some folk have not but trouble

hyunky · by **hyunky** » Tue Feb 21, 2012 4:11 pm

Mine could not get welded due to where the crack was!

eggcatcher wrote:these have appeared on ebay recently, from America, Ebay Item:310377324907

Seem OK but you will need to take into account the chance of getting hammered at customs for import/VAT.

Not sure about CAT legality either if they are annotated with this...

: manifold.JPG (10.04 KiB) Viewed 118 times

rainbow999 wrote:anyone ever tried one of these?

Ebay Item:180682198887

As Dupe says "Pot Luck" and as Eggy Says "manifold cheap, but by the time you buy a cat, and get it welded in, cost will build up."

rainbow999 · by **rainbow999** » Tue Feb 21, 2012 9:11 pm

were is the OBD port in the gen 3? gonna buy this Ebay Item:230644533100

to read my engine code first

01goodwina · by **01goodwina** » Wed Feb 22, 2012 5:21 am

little flap next to your right knee, pull it open from the bottom to expose all of the fuses. Bottom center of there.

I bought one of those fault finders for the laptop. Keeps saying my serial port is not open. No idea what that means but it makes me look like a race car driver....

Joff · by **Joff** » Wed Feb 22, 2012 8:07 am

Read this

rainbow999 · by **rainbow999** » Thu Feb 23, 2012 6:09 pm

got my scanner today works a treat, fault code p0133 registered according to my booklet its 02 sensor CKT Slow response (bank 1 sensor 1) anyone?

its running well maybe using more fuel than normal tho

eggcatcher · by **eggcatcher** » Thu Feb 23, 2012 9:08 pm

It means the front lambda sensor has detected a problem with the exhaust system/gases coming out. Interpreting that with what you already been told, I'd say thats its telling you that you have a cracked manifold

.

hyunky · by **hyunky** » Thu Feb 23, 2012 9:14 pm

eggcatcher wrote:I'd say thats its telling you that you have a cracked manifold .

The UK Hyundai Coupe Club

Manifold

Manifold

Re: Manifold

Re: Manifold

Re: Manifold

Re: Manifold

Re: Manifold

Re: Manifold

Re: Manifold

Re: Manifold

Re: Manifold

Re: Manifold

Re: Manifold

Re: Manifold

Re: Manifold

Who is online